Can You Ceramic Coat a Car in a PNW Winter? What Cold Weather Means for Curing
By Jaisen Ostrom
Hey! This time of year I get the same question a lot: "Can you still do a ceramic coating when it's cold and raining all the time?" It's a fair question. Late fall and winter on the Eastside means short days, wet driveways, and mornings that barely get out of the 30s.
The honest answer is yes, a coating can absolutely be done in winter, but it takes a little more planning than in July. Here's what cold weather actually changes, what I need to make it work, and how to decide if now is the right time for your car.
Why temperature matters for a ceramic coating
A ceramic coating starts as a liquid. After it goes on, it hardens, or cures, and bonds to the paint, glass, plastic trim, and wheels. That curing step is what gives you the slick, water-beading finish that makes the car so much easier to wash.
Curing depends on temperature. The curing temperature needs to be at least 45 degrees, so on a cold Eastside day I have to think about where the car is going to sit while the coating sets up, not just where I'm working on it.
What happens when it's too cold or too wet
If the car sits out in near-freezing temps or gets rained on before the coating has had time to cure, you're not giving it the conditions it needs to bond properly. That's why I won't just push ahead on a cold, soggy day and hope for the best. I'd rather plan it right the first time than have you paying for protection that didn't set up the way it should.
What I need to do a coating in winter
Since I'm fully mobile, a lot of my work happens in driveways and garages around Kirkland, Bellevue, Redmond, and the rest of the Eastside. For a coating in the colder months, here's what makes it work.
A covered space that stays warm enough
The biggest thing is a garage or covered space where the car can stay out of the rain and above that 45 degree mark. A heated garage is ideal. An attached garage that stays reasonably warm can work too. If you're not sure, just let me know what your setup looks like and I'm happy to take a look and tell you honestly whether it'll work.
Time to let it cure
On my ceramic coating page I lay out the full process, and the last step is storing the car overnight if possible so the coating can cure. In winter that overnight piece matters even more. If you can leave the car parked inside and not drive it through rain or slush right away, that gives the coating the best start.
Drop-off as a backup
If your place doesn't have a covered spot that stays warm enough, that's okay. Mobile coatings can be done up to 40 miles outside of Bellevue, or the car can be dropped off. Couple of different options, whatever works best for you!
Why winter is actually a good time to think about it
It might sound backwards, but a lot of people book coatings in late fall and winter for good reasons.
The rain is when you notice it most. With a coating, rain water flies off the surface and the car stays cleaner longer, even in the rain. That's a big deal from November through spring here.
Road grime comes off easier. The slickness of the coated paint lets dirt and road film wipe right off when you wash it. If you do pass trips, my post on protecting your paint from road grime and de-icer goes into that more.
Your paint gets a reset first. Before a coating I wash the car with the two bucket method and a strip wash, decontaminate it, clay it, and polish it. After a summer of sun and a fall of sap and leaves, that prep alone makes a huge difference in how the paint looks.
Which coating option fits your car
Right now my pricing page has two ways to get a coating on your car. Prices don't include tax.
Level 2: polish plus a 1 year coating
Level 2 adds a 1-step polish, a 1 year ceramic coating on the exterior paint and plastics, rain repellent on the windows, and sap and tar removal. It's $500 for a sedan or coupe, $600 for an SUV or truck, and $700 for an XL truck. It's a nice step up from wax if you want to see what a coating feels like through a wet season.
Level 3: full correction plus a 3 to 5 year coating
Level 3 is the full paint correction (cut, compound, and polish) with a ceramic coating rated for 3 to 5 years of protection. It's $1500 for a sedan or coupe, $2000 for an SUV or truck, and $2500 for an XL truck. This is the one for people who want the paint looking its best and protected long term.
If you're torn between the two, my post on whether ceramic coating is worth it in the Pacific Northwest walks through the trade-offs.
What if you'd rather wait until spring?
That's totally fine too. If you don't have a warm covered space and drop-off doesn't work for you, it can make sense to wait for milder weather. In the meantime, a Level 1 detail with a wax or sealant will give your paint some protection for a few months. Just know that wax wears off much faster than a coating, so it's more of a bridge than a long-term fix.
A quick test you can do yourself: spray some water on your hood and see if it makes tight beads. If the water just sheets and sits flat, your old protection is probably gone, and the paint is taking the full hit from the rain and road film.
Quick winter coating checklist
Do you have a garage or covered spot that stays at least 45 degrees?
Can the car stay parked inside overnight after the coating goes on?
If not, is drop-off an option for you?
Do you know which level fits: Level 2 (1 year coating) or Level 3 (3 to 5 year coating)?
If you can answer those, we're in good shape to plan it.
Let's figure out what works for your car
Winter coatings are very doable, they just take a little more planning around temperature and curing time. I'm happy to talk through your setup and help you pick a day that gives the coating the best shot.
You can book a time at calendly.com/exhibitautodetailing, or if it's easier, feel free to call or text me at 206-963-7984. You can also email me at info@exhibitautodetailing.com. Let me know!
Jaisen Ostrom Exhibit Auto Detailing